Execute a self test to check the status of the GS-24. Use this to check the GS-24 when it appears to be not operating correctly. A computer is not required in order to carry out the self test. If the self test cannot be executed, the machine may have malfunctioned. Contact your authorized Roland DG Corp. dealer.

Procedure

Make sure that the material is load to the machine.
  1. Press several times to display the screen shown in the figure.

     

  2. Press several times to display the screen shown in the figure.

     

  3. Press .

  4. Press .

    Operation is normal if the figure shown below is cut.

Back Next