Preparing the Cleaning Liquid for Head Refreshing

IMPORTANT:

  • Before performing this work, read the labels on the cleaning liquid for head refreshing bottle and on the bottle for head refreshing and follow the precautions listed there.

  • Perform this work carefully so as to avoid spilling the cleaning liquid for head refreshing.

  • Do not mistake the cleaning liquid used in manual cleaning and the cleaning liquid for head refreshing. "For Head Refresher" is written on the label of the cleaning liquid for head refreshing bottle.



  1. Pour 20 to 30 ml of the cleaning liquid for head refreshing into the measuring cup.
    IMPORTANT:

    Quickly wipe away any spilled cleaning liquid.

  2. Attach the nozzle to the bottle for head refreshing and remove the cap from the nozzle.


  3. Insert the cleaning liquid into the bottle.
    1. Squeeze the bottle and bring its nozzle into contact with the cleaning liquid poured into the cup.
    2. Wait until the cleaning liquid is suctioned into the bottle.
    Repeat these steps until there is no cleaning liquid in the cup.


    IMPORTANT:
    • Wipe away any cleaning liquid that adheres to the area around the bottle or the work table.
    • Wipe away the small amount of cleaning liquid that remains in the cup, and then store it so that dust does not get inside.


    • Attach the cap to the bottle for head refreshing, and then store it.