Setting the Suction Function

The flat table suctions the object to be printed on to make it hard to move and easy to load.
Press PAUSE/VACUUM.
The suction function turns on (or off).
Point:
The suction function cannot be changed in the following situations.
  • During setup processing
  • When a menu is displayed
  • During printing (including when printing is paused or is being canceled)
  • When an error is displayed
IMPORTANT:

The suction function cannot be used to hold in place curled or thick objects to be printed on. Secure the media in place using a substance such as commercially available adhesive tape affixed directly to the flat table.