If the Discharged Fluid Disposal Message Appears

The message appears when a certain amount of discharged fluid has collected in the bottle. If this message appears, dispose of the discharged fluid.


  1. When the following message appears, press [ENTER].


  2. Open the panel cover.
    Remove the screw on the top of the panel cover, tilt the panel cover forward slightly, and then pull out the panel cover in the direction indicated by the arrow.


  3. Remove the drain bottle and discard the discharged fluid.


    : Upper limit. Discard the discharged fluid before this line is passed.

    IMPORTANT:

    When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to prevent this fluid from soiling your hands.

  4. Quickly attach the emptied drain bottle to the machine once more.
  5. Close the panel cover.
    Catch the panel cover pins on the notches, and then attach the panel cover.


  6. Press ◀ or ▶ to select YES.


  7. Press ENTER.
    The display returns to the original screen.
    MEMO:

    If you did not discard the discharged fluid and selected NO

    The display also returns to the original screen if you did not discard the discharged fluid and selected NO. In this case the [EMPTY DRAIN BOTTLE] message disappears temporarily. The message appears again once a certain amount of discharged fluid has collected.

    CAUTION:

    When the [EMPTY DRAIN BOTTLE] message appears on the screen, discard discharged fluid as soon as possible.

    Repeatedly selecting NO without discarding the discharged fluid may cause it to spill out of the drain bottle, soiling your hands or the floor.