Basic Handling Methods
- Basic Information
- Basic Operations
  - Power Supply Operations
  - Checks before Operations
Output Method
- Printing Operations
  - Printing method
  - Pausing and Canceling Printing
Optimizing Quality and Efficiency
Maintenance
Troubleshooting Methods
Appendix

Home
Troubleshooting Methods
Machine Problems
The Flat Table Does Not Move
Is something stuck in one of the movable components inside of the machine?

Is something stuck in one of the movable components inside of the machine?

Check whether or not something is catching or stuck and interfering with operation.

Troubleshooting Methods
- Print Quality Problems
- Machine Problems
  - The Print Heads Do Not Move
  - The Printer Unit Does Not Run
  - The Flat Table Does Not Move
    - Is something stuck in one of the movable components inside of the machine?
    - Are any covers open?
  - The Head Gap Sensor Does Not Detect the Object to Be Printed on
  - It Is Not Possible to Check the Amount of Discharged Fluid in the Drain Bottle
- Messages on the Operation Panel

FA01581/R1-190830
Copyright 2019 © Roland DG Corporation https://www.rolanddg.com/