Setting the Media Size

This section explains how to set the size of the media used for printing.
  1. Click for the queue folder that you want to use.

    The Queue Properties window appears.
  2. Click .
  3. Click Get Media Width.
    VersaWorks obtains the information about the width of the printable area from the printer and sets W automatically. When the LEF series is used, W and L are set automatically.
    IMPORTANT: If you want to specify L on models other than the LEF series
    • Select CustomCUT from Size, and then enter a value.
  4. Click OK.
    • These settings can also be customized per job using the Job Settings window.