Cleaning the Parts that Come into Contact with the Material
Wipe off dirt and grime with a cloth moistened with water and then wrung out firmly.
| Pinch roller | Hold the roller with your hand so that it does not turn, and wipe off grime and material scraps from the rubber part of the pinch roller. Then, wipe clean with a dry cloth. | |
| Carriage rail*1 | Wipe away any dust and grime. | |
| Paper sensors | After wiping away dust and grime, wipe clean with a dry cloth. | |
| Platen | After wiping away dust and grime, wipe clean with a dry cloth. | |
| Grit roller*1 | After raising all of the pinch rollers, turn the grit roller while using a brush*2 to remove dust from the surface. |