Setting the Acceleration Level for Up Speed

Set the blade's up speed during cutting (the speed at which the blade travels horizontally when it moves to the next cutting line after cutting one cutting line), and then set the blade acceleration.

Procedure
  1. Press [SPEED].
    If material is loaded, press [ON/OFF LINE] to switch to offline mode.
  2. Press [▶] several times to display the screen shown below.

    The current value is displayed on the screen.


    MENU_Speed_Upaccel

  3. Press [▲] or [▼] to select the acceleration level.
    You can select from three acceleration levels: "High", "Medium", and "Low".
  4. Press [ENTER] to confirm your entry.
  5. Press [ON/OFF LINE] to go back to the original screen.
    MEMO Default setting: "Medium"