Printer Unit

Front

No.	Name	Function overview
	Handle	Hold this handle to open and close the font cover gently.
	Front cover	Keep this cover closed except when necessary, such as when loading the object to be printed on.
	Status light	When lit, the color of the light indicates the status of the machine.
	Operation panel	The panel containing the buttons used to operate the machine.
	Panel cover	Remove this when performing actions such as replacing the wipers and discarding the discharged fluid.
	Print-head carriage	The print heads are inside this carriage.
	Carriage fan	Spins while printing.
	UV-LED device	Shines the UV light used to cure the ink.
	Drain bottle	Discharged fluid is stored in this bottle.
	Head gap sensor	Detects the height of the object to be printed on.
	Flat table	Table on which the object to be printed on is loaded.
	Extension plate	Suppresses UV light reflections.
	Maintenance cover	Remove this when performing actions such as cleaning the print heads.
	UV screen	Changes the UV light reflection direction to prevent the UV light from reflecting onto the print heads.
	Reflected light suppression plate	Suppresses UV light reflections.

CAUTION:

Excluding the top of the flat table, do not place your hands on or touch the inside of the product.

Doing so may cause burns.

CAUTION:

Do not place any object on top of the extension plate or press on it with force.

Doing so may cause damage.

CAUTION:

Do not place any object in front of or behind the flat table.

The flat table moves horizontally and vertically. If there is any object between the flat table and the machine, it can be caught and cause the machine to malfunction.

CAUTION:

If anything drops toward the back of the flat table, switch off all power switches before looking for the dropped object.

Otherwise sudden movement of the machine may cause injury.

IMPORTANT:

Do not place anything near the reflected light suppression plate. Doing so will eliminate the reflected light suppression effect.

Rear

No.	Name	Function overview
	Main power switch	Switch the main power on/off.
	Power cable port	Use this to connect the power cable.
	Status LED	This lights up green when the connection to the network is normal.
	Activity LED	This flashes yellow while data is being received from the network.
	LAN cable connector	Use this to connect the LAN cable.
	Expansion terminal A	This terminal can be used to connect the machine to an external deodorizer (the deodorizer is sold separately).
	Expansion terminal B	This terminal can be used to connect the machine to an external output device used by the user.

Side

No.	Name	Function overview
	Cartridge slots	The location where ink cartridges are installed.
	Alarm lamp location	Attach an alarm lamp (sold separately) to the machine here. When a lamp is installed, the connecting parts are contained within the cover.
	Alarm lamp connector	Use this to connect an alarm lamp to the machine. When a lamp is installed, the connecting parts are contained within the cover.