Preventing Primer Dot Drop-out

This cleaning prevents dot drop-out for printers equipped with primer. When data that includes primer or white is printed, cleaning is performed if the time that has elapsed since the last cleaning operation exceeds the set time.

This cleaning function can only be used when you are using primer (the ink type is ECO-UV4 CMYKPrGlWW).

  1. Press MENU.
  2. Press ▼ several times to display the screen shown below.


  3. Press ▶.
  4. Press ▼ several times to display the screen shown below.


  5. Press ▶.


  6. Press ▲ or ▼ to select an item.
    PRIMER CL. Explanation
    PAGE Automatic cleaning is performed each time prior to the start of printing.
    10 to 360 MIN If the time that has elapsed since the last cleaning operation exceeds the set time, cleaning will be performed before printing starts. You can set the value in units of 10 minutes from 10 minutes to 360 minutes.
    NONE

    (Default settings)

    		 Cleaning is not performed prior to the start of printing.
  7. Press ENTER to confirm your entry.
  8. Press MENU and then ◀ to return to the original screen.