Replacing the Wipers and Wiper Cleaner
The wipers and wiper cleaner are consumables that you use when cleaning the print heads. They need to be replaced at appropriate intervals.
CAUTION:
Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
IMPORTANT:
-
A warning beep sounds 10 minutes after operation begins. If the warning beep is heard, temporarily stop work, close the front cover, and press ENTER. Quit the wiper replacement menu. After that, restart the procedure from the beginning.
-
Be sure to hold the handle of the front cover and open and close it gently.
| Required items | |||
|---|---|---|---|
| Included items | Commercially available item | ||
 |
 |
 |
 |
| Wipers (2) | Wiper cleaner | Tweezers | Cloth |