Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in which the power-saving feature is working) when no print data is received and no operations are performed for a continued length of time.
  1. Press MENU.
  2. Press ▼ several times to display the screen shown below.


  3. Press ▶.
  4. Press ▼ several times to display the screen shown below.


  5. Press ▶ twice to display the screen shown below.


  6. Press ▲ or ▼ to select the time.
    You can set the value in units of 15 minutes from 15 minutes to 120 minutes.
  7. Press ENTER to confirm your entry.
  8. Press MENU and then ◀ to return to the original screen.
    MEMO:

    When "SLEEP SETTING" is set to DISABLE, the machine does not switch to sleep mode, so this setting is ignored.