Cleaning the Wiper Tray

Discharged fluid collects in the wiper tray. The wiper tray must be cleaned periodically.

If the following message is displayed, clean the wiper tray.



WARNING

Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.

Sudden movement of the machine may cause injury.

Procedure
  1. Press [ENTER].


  2. Press [MENU].
  3. Press [▼] several times to display the screen shown below.


  4. Press [▶] once, and then press [▼] several times to display the screen shown below.


  5. Press [▶] once, and then press [▼] several times to display the screen shown below.


  6. Press [ENTER].
    The screen shown below appears.


  7. Remove the drain bottle and discard the discharged fluid.


    IMPORTANT:

    When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to prevent this fluid from soiling your hands or the floor.

    CAUTION:

    Before you detach the drain bottle, be sure to wait for the screen to display "EMPTY DRAIN BOTTLE". After discarding the discharged fluid, promptly attach the drain bottle to the machine.

    Failing to follow this procedure may cause discharged fluid to flow out of the tube and spill, soiling your hands or the floor.

    WARNING

    Never place discharged fluid or ink near an open flame.

    Doing so may cause a fire.

    CAUTION:

    To store discharged fluid temporarily, place it in the included drain bottle or in a durable sealed container such as a metal can or polyethylene tank, and cap tightly.

    Any spillage or vapor leakage may cause fire, odor, or physical distress.

    IMPORTANT:

    Do not store discharged fluid in a location where it is exposed to direct sunlight.

    When temporarily storing discharged fluid in the included drain bottle, do not store it in a location that is exposed to direct sunlight. The discharged fluid may harden, making the drain bottle unusable. The drain bottle may also deteriorate, leading to discharged fluid leaks.

    IMPORTANT:

    Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.

    Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid or discard it with ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may have an adverse impact on the environment.

  8. Quickly attach the emptied bottle to the machine once more.
  9. Press [ENTER].
    After the [DRAIN TRAY] screen appears, the screen shown below appears, and then the machine is filled with TR2 cleaning liquid. The (approximate) remaining time for the procedure is displayed on the screen. (The display shown below is an example. "01:40" = "1 minute and 40 seconds")


    If the TR2 cleaning liquid runs out during filling, the screen shown below appears. Replace the TR2 cleaning liquid pouch. When you replace the wiper cleaning liquid pouch, the display returns to the original screen.

    TR2 Cleaning Liquid Pouch Replacement


    When the following screen is displayed again, the wiper tray cleaning is finished.


  10. Press [MENU] to go back to the original screen.