Smoothly Cutting Arcs and Other Curves (Smoothing)

You can set the curves in cutting data sent to this machine to be smooth. Normally, the smoothing function is set to "Enabled", but in cases where you are cutting small text or intricate shapes, set the smoothing function to "Disabled" in order to prevent the corners from being cut rounded. We recommend that you also set this to "Disabled" when you need to increase productivity regardless of quality.

Procedure
  1. Press [TOOL SELECT].
    If material is loaded, press [ON/OFF LINE] to switch to offline mode.
  2. Press [▶] several times to display the screen shown below.

    MENU_TOOL_Smooth

  3. Press [ENTER].
    The current value is displayed on the screen.
  4. Press [▲] or [▼] to set this to "Enabled".
  5. Press [ENTER] to confirm your entry.
  6. Press [ON/OFF LINE] to go back to the original screen.
    MEMO Default setting: Enabled