Configuring the Cutting Conditions Based on the Color of Cutting Lines
Procedure
- Start GreatCut-R.
-
Display cutting data, which includes the cutting lines, on the GreatCut-R work screen.
- GreatCut-R format file:
- Select the cutting data from Open. , and then click
- Other files:
- Select the cutting data from Open. , and then click
MEMO CorelDRAW format files cannot be imported into GreatCut-R. Open the target cutting data in CorelDRAW and click on the menu bar. - GreatCut-R format file:
-
Right-click on any layer in the Layer window.
The Layer Settings window appears. If the Layer window is not displayed, turn on .
-
Click the layer with the cutting lines used in the cutting data and configure the layer's output settings.
Clicking Output or Color switches the display of the Layer Settings window.
Setting item Settings Notes Information Enter the layer name by combining the cutting type, color number, etc.*1 Mode / Tool*2 Defalut
Cut
Cut with AAS
FlexCut
Defalut: The parameter values set in the Output to device window are applied. *3
Cut: Set to cutting only
Cut with AAS: Set to printing and cutting
FlexCut: Set to perforated cutting
-
Set Material () and parameter ().
Layers with their output settings configured are marked with a red check mark next to them.
- Click OK to close the Layer Settings window.