Manually Setting the Cutting Order

Manually set the layer output order.
MEMO If Defalut is selected from the Mode / Tool list in the layer cutting condition settings, the cutting order cannot be set.
Procedure
  1. Start GreatCut-R.
  2. Display cutting data, which includes the cutting lines, on the GreatCut-R work screen.
    • GreatCut-R format file:
      • Select the cutting data from File - Open, and then click Open.
    • Other files:
      • Select the cutting data from File - Import, and then click Open.
    MEMO CorelDRAW format files cannot be imported into GreatCut-R. Open the target cutting data in CorelDRAW and click CD_icon_Cut on the menu bar.
  3. Click Settings - Color Palette - Layer Order.
    The Layer Order window appears.
  4. Select the layer you want to change the order of and click a location under Move Layer ().
    MEMO Layers are cut in the order displayed in the Layer Order window (top to bottom). Layers must be in rational order based on cutting methods. Any layer with drawing only should be placed before a layer that includes cutting edges.


  5. Click OK.
    The layer order is saved.