Setting the Blade Force

If the design peels off or if the carrier paper is also cut with the material, change the blade force.
Procedure
  1. Press [FORCE].
    If material is loaded, press [ON/OFF LINE] to switch to offline mode.

    The current blade force is displayed.


    MENU_Force

  2. Press [▲] or [▼] to change the blade force.
  3. Press [ENTER] to confirm your entry.
    MEMO
    • Default setting: 80 gf
    • Setting range: 5 to 600 gf (changeable in 5 gf increments)