When Printing Align for Measurement Charts

Procedure
  1. Connect the measurement instrument.
    Use the measurement instrument specified in Preferences - For Spot and Special Colors.
  2. Click Select with Measurement Instrument and measure the chart.
    An asterisk will be displayed for the swatch with the color closest to the color being adjusted.
  3. Click Save to Library.

    The selected color is applied to the selected spot color on the relevant tab of the Start Nearest Color Finder window. However, it will not be applied to jobs with a different Quality setting.

  4. Specify the color on all tabs.
  5. To close the Nearest Color Finder window, click Exit.
This completes the nearest color finder settings. Output a job and check that the set spot color is output as intended.