Sending CorelDRAW Cutting Jobs from the Printer Driver

Check that the machine is in online mode and start cutting.
WARNING

Never touch the cutting carriage while output is in progress.

The cutting carriage moves at high speed. Coming into contact with the moving carriage may cause injury.

Procedure
  1. Start CorelDRAW.
  2. Click File - Open to select cutting data that includes cutting lines.
  3. Click File - Print.

    The Print window appears.

  4. Select the General tab and select this machine model for Printer.

    PrinterDriver_setting_CD_1

  5. Click CD_icon_DriverSetting.
    The Printing Preferences window appears.
  6. Select the Cutter tab and change the cutting conditions ().
    If necessary, configure the other cutting settings ().
    If you have saved presets, you can load a preset and apply cutting conditions.

    CutSetting_PrinterDriver_1

  7. Switch to the Paper tab and enter the size of the loaded material (X: length/Y: width) under Paper Size.
    CutSetting_PrinterDriver_2
  8. Click OK to close the Printing Preferences window.
  9. Switch to the Color tab in the Print window and select this machine model for Color conversions.

    PrinterDriver_setting_CD_2

  10. Switch to the Layout tab and select Bottom left corner for Reposition artwork to.

    PrinterDriver_setting_CD_3

  11. Click Print.
    The cutting job is sent to the machine.